- Posts: 63
- Thank you received: 5
numitron clock
2 years 8 months ago #10672
by lcc
Replied by lcc on topic numitron clock
HI Ian
just a quick question i used my old wifi router when i finally got sorted but im thinking of going back to my new router is there anything that i need to do like clear the old address from the clock
regards
steve
just a quick question i used my old wifi router when i finally got sorted but im thinking of going back to my new router is there anything that i need to do like clear the old address from the clock
regards
steve
Please Log in or Create an account to join the conversation.
2 years 8 months ago #10673
by Ian
Replied by Ian on topic numitron clock
What should happen is this: As soon as the clock is restarted, it tries to connect. If it cannot connect it should go back into "Open" Mode and you should be back to the start of the sign up process.
If you want, you can reset the module beforehand ("utilities" page), but it is not really necessary..
Remember that it only waits 60 seconds in Open mode, and fi no one tries to connect, it will just fall back to the RTC.
If you want, you can reset the module beforehand ("utilities" page), but it is not really necessary..
Remember that it only waits 60 seconds in Open mode, and fi no one tries to connect, it will just fall back to the RTC.
Please Log in or Create an account to join the conversation.
2 years 8 months ago - 2 years 8 months ago #10675
by judge
Replied by judge on topic numitron clock
Interesting that the numitrons are supposed to be soldered directly to the board. I soldered 'socket pins' to mine so the numitrons are removable. I seem to recall, though, that the numitron pins themselves did not fit into the holes in the PCB, though I didn't use much force.
Last edit: 2 years 8 months ago by judge.
Please Log in or Create an account to join the conversation.
2 years 8 months ago #10690
by Ian
Replied by Ian on topic numitron clock
Maybe socket pins would be a good idea, but as long as they are recessed into the board. I have a load of Noval sockets, but I absolutely hate them. They require a lot more force than I feel happy with to insert and remove the tube.
Please Log in or Create an account to join the conversation.
2 years 8 months ago #10693
by lcc
Replied by lcc on topic numitron clock
i was thinking of using socket pins but thought that the tubes would sit to
high up so that's why i when for the solder option
steve
high up so that's why i when for the solder option
steve
Please Log in or Create an account to join the conversation.
2 years 8 months ago - 2 years 8 months ago #10694
by lcc
Replied by lcc on topic numitron clock
well good news went through the set proceeder again and all went well and even managed to update it to v3
Last edit: 2 years 8 months ago by lcc.
The following user(s) said Thank You: Ian
Please Log in or Create an account to join the conversation.
Time to create page: 0.106 seconds