DA-2000 NUMITRON tubes not driven

More
8 months 2 weeks ago #12355 by Ya
Good news.
It works!!
It was the wemos
Well, almost I burnt a driver. But I'm super happy, the clock is sublime, it really looks great
Attachments:

Please Log in or Create an account to join the conversation.

More
8 months 2 weeks ago #12356 by Ian
I'm not sure if it is the Wemos or the programming. Perhaps there is an error in the flashing or the firmware loaded.

Anyway, I am happy it works: It is a really nice clock - by far my favourite now. :)

Regards

Ian

Please Log in or Create an account to join the conversation.

More
8 months 2 weeks ago #12357 by Ya
I lean more on the wemos. by making a continuity test between the chip and the pins, several pins do not respond

Please Log in or Create an account to join the conversation.

More
8 months 2 weeks ago #12358 by Ya
Anyway thank you for your help!!
I just have two more questions for you.
Would you be willing to send me a spare tlc? Against payment of course.
Is the code for this clock open source?

Please Log in or Create an account to join the conversation.

More
8 months 2 weeks ago #12359 by Ian
That could be possible: can you check if the soldering from the ESP12 module and the Wemos board looks good? Perhaps there is an error in the soldering there.

Please Log in or Create an account to join the conversation.

More
8 months 2 weeks ago #12360 by Ian
I can send a spare TLC - no need to pay anything. It is to make amends for the Wemos which I think must be faulty.

The source code is available to customers, so yes. I do not just post it on the Internet, but for people who have the kit is no problem. I'll contact you to say how to get it... ;)

Please Log in or Create an account to join the conversation.

Moderators: AccutronTy_EeberfestIan
Time to create page: 0.100 seconds
Go to top
JSN Boot template designed by JoomlaShine.com