IV-6 or IV-3A freebies

More
6 months 1 week ago #11030 by Ty_Eeberfest
Replied by Ty_Eeberfest on topic IV-6 or IV-3A freebies
Sorry, I have no experience at all with this particular kit. You might want to re-post in the Wemos Clocks sub-forum. Your post is more likely to get noticed there by someone who has built the VFD Wemos clock.

Look into it later when the dust is clearing off the crater.

Please Log in or Create an account to join the conversation.

More
6 months 1 week ago #11035 by jonboy
Replied by jonboy on topic IV-6 or IV-3A freebies
Thanks Ty, I will do.
I have noticed in the photos above that when it shows the iv-6 tubes picture, the wemos seems to be upside down, from when it shows it with the iv-3a tubes.
As I have iv-6’s should I turn my wemos over?
Is the wemos stopping me get to 50v or should I get 50v even with the wemos not plugged in?
Thanks again

Please Log in or Create an account to join the conversation.

More
6 months 1 week ago #11037 by Ty_Eeberfest
Replied by Ty_Eeberfest on topic IV-6 or IV-3A freebies
The problem here is that I have no documentation whatsoever on the VFD clock and no idea where it is (I've looked). I will email Ian and ask him directly where it is. But for now I am going just by what sounds right...

The RGB LEDs are not going to do much of anything with no program in the WeMos. Either no light at all or maybe some of them will come on randomly on power up.

The WeMos probably is not needed for 50V power generation. But you might want to stop replacing power section parts until we either get a schematic or you get the WeMos programmed.

I can't tell much from the photos BUT I can think of no reason why the WeMos would be installed differently for different types of tubes. That just doesn't make sense.

Look into it later when the dust is clearing off the crater.

Please Log in or Create an account to join the conversation.

More
6 months 1 week ago #11039 by jonboy
Replied by jonboy on topic IV-6 or IV-3A freebies
Hi Ty,
I can’t seem to attach it as it’s bigger than 1mb.
Can you send me your email and I will email it to you.
Hope that’s ok.

Please Log in or Create an account to join the conversation.

More
6 months 1 week ago #11040 by jonboy
Replied by jonboy on topic IV-6 or IV-3A freebies
Hi Ty
Just used your websites email connected to your profile.
If you need me to send it to a different one, let me know.
Thanks

Please Log in or Create an account to join the conversation.

More
6 months 1 week ago #11041 by Ian
Replied by Ian on topic IV-6 or IV-3A freebies
Hi Guys, all of a sudden there has been a lot of interest for this project. Please hang in there a moment while I publish the code and the schematics. I thought it was a dead project, but that doesn't seem to be the case, so I guess I will actually go ahead and publish it...
The following user(s) said Thank You: Ty_Eeberfest, BS_Jim

Please Log in or Create an account to join the conversation.

Moderators: AccutronTy_EeberfestIan
Time to create page: 0.097 seconds

Search

Tube Suppliers

Go to top
JSN Boot template designed by JoomlaShine.com