Re: Tiny universal clock PCB

More
7 years 7 months ago #5722 by Icedlink
Tube board for B13B please ~ :laugh:


-Drumroll -


-applause-

Please Log in or Create an account to join the conversation.

More
7 years 7 months ago #5726 by mjsangster
I'm finishing up the design for a 5750 Nixie tube daughter card, dimensions 4.6" x 1.2" (tentative).

I'm also planning a IN-17 and IN-12 card.

- Michael Sangster
Cold War Creations

Please Log in or Create an account to join the conversation.

More
7 years 7 months ago #5727 by mjsangster
I haven't considered a B13 card, because sockets are available for those tubes - can be wired directly to sockets.

If there is enough interest, I would design that board, too.

- Michael Sangster
Cold War Creations

Please Log in or Create an account to join the conversation.

More
7 years 7 months ago #5728 by Icedlink
If the b13b socket board has the small LEDs soldered. It will make the overall clock thinner / smaller and neat when placing two boards together.



^_^

Please Log in or Create an account to join the conversation.

More
7 years 6 months ago #5746 by mjsangster
Update:

1. Fine tuning power supply
2. Continuing software testing
3. Waiting for delivery of final proto board

As soon as I verify the final proto board, I will order the 1st batch of boards.

Also, I finished the first draft of the User Manual

www.coldwarcreations.com/pdf/MicroBoardv12.pdf

- Michael Sangster
Cold War Creations

Please Log in or Create an account to join the conversation.

More
7 years 6 months ago - 7 years 6 months ago #5747 by cf8m
Replied by cf8m on topic Re: Tiny universal clock PCB
HI do you know yet how much the board will cost?
Last edit: 7 years 6 months ago by cf8m.

Please Log in or Create an account to join the conversation.

Moderators: AccutronTy_EeberfestIan
Time to create page: 0.148 seconds
Go to top
JSN Boot template designed by JoomlaShine.com