NP-10 Tiny Nixie Power Supply for IN-18, IN-14 and other Tubes [12V~250V]
Output:12-250VDC (Adjust by single resister, default:180VDC)
Efficiency: 87% (180V@35mA, Vin=12V)
Power out: 15W (Max Vin=28V)
Output setting:Programmed with a single resistor to ground
Module size: 20mm*16mm*8.5mm
Table 1: Electrical Specifications
check via ebay
1. Include input reverse polarity protection is provide.
2. Enable pin can floating the pin or connect to MCU. By using this pin for clock synchronization.
3. Output of module is short circuit protected via pulse-pulse current limiting.
100% test and assembly
Notes: shipping only one module(Fig4), not include tubes and other parts.