WiFi Time Provider not working after firmware update

7 months 1 day ago - 7 months 1 day ago #10946 by MikeS

Ty_Eeberfest wrote: Do you have an ESP-01 programming device? Something like this:
Link to ESP Programmer on eBay

Those work great, if you do a bit of soldering.

Connect the CH340 pin 14 (/RTS) to the ESP-01 pin 6 (/RST), and CH340 pin 13 (/DTR) to ESP-01 pin 2 (IO0). Then you don't have to mess with buttons, the Arduino IDE will automagically put it into programming mode by controlling the modem signals. Choose Reset Method:CK in the IDE.

The reset methods are described here .
Last edit: 7 months 1 day ago by MikeS.

Please Log in or Create an account to join the conversation.

Moderators: AccutronTy_EeberfestIan
Time to create page: 0.161 seconds


Tube Suppliers

Go to top
JSN Boot template designed by JoomlaShine.com