- Posts: 29
- Thank you received: 4
Ty_Eeberfest wrote: Sorry for the late response.
I used a 9V 1A supply at first. Then tried with a bench supply (converted ATX supply) at 12V, this one should definitely be able to supply enough amps.
Ty_Eeberfest wrote: The usual suspect for spontaneous reboots is the external power supply. I'm not sure what voltage you are feeding to the clock board, but if you happen to a 12V supply rated at >= 0.5A (bench supply maybe!) try using it. Do a factory reset (hold down clock's button as you apply power) and do the HV calibration, see how it goes. If that doesn't fix it we can then dig deeper.