Rev4 6digit IN-12 clock

More
1 year 2 months ago #10055 by PhillV_76
Replied by PhillV_76 on topic Rev4 6digit IN-12 clock
Thanks guys, not had chance to check it yet due to work commitments, will take another look next week while im off :) fingers crossed

Please Log in or Create an account to join the conversation.

More
1 year 2 months ago #10056 by PhillV_76
Replied by PhillV_76 on topic Rev4 6digit IN-12 clock
Morning, so far i have checked continuity, all ok, i have checked ohms from k155 legs to digits on tubes, while inserted into sockets (unpowered) i get 0.05 ohms to each pin, which then drops to 0.00 ohm, have also checked continuity between pins 0-9 and respective legs on Ki55 all registered also checked between pins 0-9 and respective cathodes on tubes, may be time to remove all wiring and star from scratch

Please Log in or Create an account to join the conversation.

More
1 year 2 months ago #10059 by Phil_Mod3
Replied by Phil_Mod3 on topic Rev4 6digit IN-12 clock
Hm, I'm running out of ideas.
Could you check if the K155 doesnt output 5+6? i.e. swap the leads in such way that output of K155 is connected to tube-digits which are surely working.

Please Log in or Create an account to join the conversation.

More
1 year 2 months ago #10063 by Ian
Replied by Ian on topic Rev4 6digit IN-12 clock
Could you link a short video of the problem: A picture paints a thousand words...

Please Log in or Create an account to join the conversation.

More
1 year 2 months ago #10065 by PhillV_76

Please Log in or Create an account to join the conversation.

More
1 year 2 months ago #10066 by Phil_Mod3
Replied by Phil_Mod3 on topic Rev4 6digit IN-12 clock
Hi, I am not sure if its possible:
Can you make the file public? I can't access it.

Please Log in or Create an account to join the conversation.

Moderators: AccutronTy_EeberfestIan
Time to create page: 0.179 seconds

Search

Tube Suppliers

Go to top
JSN Boot template designed by JoomlaShine.com