If it takes longer again
With the delivery of my laser cutter from Flux I was able to complete the Modular Nixie Clock IN-14 tubes - WiFi kit.
Some things had to be changed because of my mistakes but the clock works perfectly.
Thanks to Ian for the excellent and patient support without his help this project would not have succeeded.
and now some pictures:
the CO2 Lasercutter I have from Flux and it is the small version of the Beambox with 40 watts and a working area of 400x400mm.
the engraving experience was not that easy but with WEICON Coating Spray MoS2 it worked well. Only the subsequent cleaning was very expensive with isopropanol but it worked.
But I will still get the original markSolid114 spray even if the tin is not quite cheap for € 80, -