Jürgen sent me one of his NixieTherm thermometers for review and I’ve had a few days to play with it and so, here is another review:
The device itself is pretty simple to operate. It takes a mini-USB power source and has one switch on the back of the unit. There is an adjustment pot on the bottom of the unit but once the device is calibrated there is little need to change this setting.
When you first power on the device, you will notice that the tube is reading out a temperature that is significantly lower than room temperature. Don’t be alarmed! This is normal. The device takes a little bit of time to warm up and start reading the correct temperature. This device is best left on as opposed to just turning it on when you want to read the current temperature.
One really cool aspect of this design is the fact that there is no microprocessor. This isn’t an Arduino project or a PIC based gadget. The thermometer portion is a 100% analog design.
Like most other NixieKits.eu designs, this device features LED back lighting. In this case, there are to RGB auto cycling lights under the plastic temperature scale. Each LED cycles at its own pace so the net result is a display where the Fahrenheit and Celsius scales are usually different colors. The backlight is on whenever the thermometer is on; there is no way to turn it off other than modifying the underlying circuitry.
The tube is an IN-9 Russian bargraph tube. It looks like the tube is made up of dozens of little neon bulbs but this is not the case. It is, in fact, one large tube and the height of the glow changes proportionately to the input voltage. The end result is a tube that acts like the mercury in a thermometer.
Below are two photos - one with a neon bulb and one with an argon variation. The tubes are identical in every respect except for the color.
The price of the kit is 69 EUR and assembly is an additional 15 EUR. The PCB is through-hole only; there are no SMD parts. It should be pretty simple for someone to assemble from scratch with little experience.
KABtronics has a pre-production nixie clock kit for sale. It is still a work in progress but it looks to be nearly complete and a few kits are available for sale. This definitely looks like it would take some time to assemble. It is made of 215 Transistors, 518 Diodes, 472 Resistors and 101 Capacitors. Wow.
Mathew Beall sent in a video of his assemble. Be sure to check it out:
Here is one more creation from the Nocrotec / NixieClocks.de team; this one is a clock based on the beautiful B-5853 tubes. The Burroughs tubes, in my opinion, are the nicest option available for tubes this size. They have a finer wire mesh than their Russian counterparts and the numerals are a little easier to read. This clock, like the IN-8 one, ships with the Black Brilliance case. This clock is only for sale as a kit but it looks pretty simple to assemble.
If someone here buys one, let me know how you like it!
The kit uses Russian IN-8 tubes that have a blue LED underneath to illuminate the glass envelope. This clock has several optional features worth noting: it can use either GPS or a DCF77 receiver to set the time. I have never actually seen a clock offer one or the other so I think that this design is unique in that regards.